Blueant X2i - Page 5

Getting started
Power On/Off
Short press@buttonto poweron/offthespeaker.Theindicatorlightwill flashblue.Each
time the speaker powers on it will reset to 50% volume. After 10 minutes with no
connection, the X2i will automatically power off to conserve battery.
Modes
Bluetooth Mode
A) Pairing
Power on the speaker and enter Bluetooth mode.The light indicator will flash. On your
smartphone search Bluetooth devices for the "BlueAnt X2i". Once connected, the speaker
will announce it is "connected" and the indicator light will cease flashing.
B) Music
Click to increase volume
Press and hold for 1.5 seconds
to skip forward a track
Click to play/pause
Click to decrease volume
Press and hold for 1.5 seconds
to skip back a track
E) Disconnect
C) Calls
Click to answer an incoming call
Click to end the active call
Double click to reject an incoming call or
press and hold
D) Siri/G00gle
Double click to active/cancel Siri/Google
voice dialing
Press and hold for 8 seconds to disconnect the current Bluetooth connection. The X2i
will prompt "disconnected". Then other Bluetooth devices can find and pair with the X2i.