Blueant X3 - Page 4

Getting Started
Charging the X3 —,
Please use the supplied USB cable and AC charger to charge the X3. The charge port can be found at the rear of the
speaker. A full charge will take around 3 hours.
Pairing the speaker to your phone or device
1. Short press the ON/OFF button
2. The speaker will say turn on and say “Bluetooth”. The light indicator will flash.
3. On your phone or device, search for “BlueAnt X3” under the Bluetooth settings menu.
4. Once paired, the speaker will say “Connected”. You are now ready to play some music!
Bass Boost Button
1. Short press the Bass Boost Button to change from Standard EQ to Bass Boost.
2. Bass Boost EQ will enhance the level of bass. Press again to go back to Standard EQ.
3. Each time the X3 is powered on, it will reset to Standard EQ.
3