Blueant X3 - Page 9

SAFETY INFORMATION AND WARRANTY TERMS
Important Safety Information
PLEASE READ THIS ENTIRE DOCUMENT CAREFULLY, BECAUSE IT CONTAINS IMPORTANT INFORMATION ABOUT THE
USE OF BLUEANT DEVICES
WARNING - PROTECT YOUR HEARING
BLUEANT DEVICES CAN REACH VOLUMES ABOVE 100 DECIBELS
ONLY CHARGE WHEN DEVICE IS CLEAN AND DRY
PROLONGED USE AT HIGH VOLUMES MAY AFFECT YOUR HEARING
CAPACITY AND MAY RESULT IN NOISE INDUCED HEARING LOSS (NIHL).
TURN OFF THE POWER TO YOUR DEVICE WHEN NOT IN USE.
Care and Handling
Your BlueAnt Bluetooth device is a precision engineered instrument. To ensure its ongoing
performance, you should look after it as you would any quality consumer electronic product,
and use itin accordance with the instructions. BlueAnt recommends that you take the following
precautions. Avoid leaving your device in direct sunlight.
« Do not leave your device, or use your device, in any area where the temperature may exceed
50 degrees Centigrade, such as inside a closed car on a hot day. Remember that on a hot day,
the temperature inside a closed car may be significantly higher than the outside air temperature.
Do not leave your device, or use your device, in any area where the temperature is likely to drop
below O degrees Centigrade (32 degrees Fahrenheit)
+ D0 not leave your device, or use your device, in any area exposed to humidy, dust, 50, other
foreign objects, smoke, or steam as this may cause your device fo malfunction.
« Do not use any household or industrial grade detergents or cleaners to clean your device. If
your device becomes dirty or smeared, in most instances a wipe with a dry or slightly damp cloth
should be sufficient to clean it
« Do not leave your Bluetooth device plugged into a wall for long periods after it is fully charged.
BlueAnt does not recommend long periods of continued charging.
« Before charging your BlueAnt device, make sure that the AC outlet, adaptor and cable are not
damaged. If you notice any abnormalities, seek advice from a qualified professional
« f travelling internationally, ensure that your BlueAnt wall or car power adapter is approved for
usein the country where you plan to use it and that the adapter voltage s suited to the local power
supply.
« Should a fault develop with your BlueAnt product, contact BlueAnt for advice on how to proceed
Do not attempt to repair or alter any BlueAnt product yoursel.
8