Blueberry plus - Product Information; Technical Specifications and Properties

blueberry PLUS R2 Installation Manual 3.0 11
3. PRODUCT INFORMATION
The blueberry PLUS charging station represents the current state of technology and
complies with all current technical safety requirements to power plug-in electric
vehicles (PHEV) and battery electric vehicles (BEV) today. It is designed for ultra-fast
charging in both public and private locations, indoor or outdoor, such as retail and
commercial parking spaces, fleet charging stations, highway rest areas and workplace.
blueberry PLUS allows sequential and simultaneous charging, through dynamic power
allocation to each output. The system has a User Unit and up to three Power Units (max
200kW each). Due to its modularity, it is possible to add 50kW power modules at any
time, up to a maximum of 600kW.
All values below @25 °C (77 °F) except where indicated.
3.1. Electrical Properties
INPUT
CE
North America
Input Voltage [V a.c.]
3x 340 - 530 +PE
3x 340 - 530 +PE
Max. Input Current @ Pnominal [A]
N
pm
* 76 @ 400V
N
pm
* 63 @ 480V
Input Power [kVA]
Power Unit: N
pm
* 53
User Unit: 0.5
Power Unit: N
pm
* 53
User Unit: 0.5
Input Frequency [Hz]
45 - 66
45 - 66
Efficiency [%]
95
95
Power Factor
0.99
0.99
THDi [%]
< 4
< 4
OUTPUT
Voltage Range [V d.c.]
150 to 1000
150 to 1000
Max. Current [A d.c.]
125, 250, 300
1
125, 300
1
Max. Power [kW]
N*50
N*50
GENERAL
Rated Diversity Factor
1
1
Pollution Degree
3
3
Installation systems
TT and TN-S
TT
* N
pm
– number of power modules – up to twelve
1
300A continuous with a peak performance of 500A