blueberry PLUS R2 Installation Manual 3.0 8
2. IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This manual must be read carefully before the installation and operation of the
blueberry PLUS charging station. Incorrect operation as a result of non-compliance
with the instructions provided by this manual may lead to severe injuries or damages.
The working steps described must only be carried out by qualified personnel who,
based on their knowledge and experience, can assess, and carry out all steps
described in this installation manual and recognize potential hazards. The blueberry
PLUS charging station shall be installed, connected, and approved for operation
according to local codes and regulations. Under no circumstances the compliance with
the information in this manual relieve the user to comply with all applicable local
codes and safety standards.
The user must under no circumstances make any changes to the blueberry charging
station or use it in a manner that was not designed for. Any disregard of this
instruction represents a safety risk and will void the warranty with immediate effect.
Damages that may occur resulting from custom installations, that are not described
in this document are not i-charging responsibility.
GROUNDING INSTRUCTIONS
The blueberry PLUS charging station shall be connected to an equipment grounding
conductor or a grounded, metal, and permanent wiring system.
BEFORE CHARGING
Before operating the blueberry PLUS charging station, make sure that the
surrounding environment is free from hazards, that the blueberry does not have any
error message on the display and that the charging cable(s) are not damaged.
SAFE CHARGING SESSION
Perform the charging process as described in the User Manual. Once the process is
completed, the plug must be placed in the correspondent holder.
To Next Page
Loading...