BlueChip BC5c - Core Phone Functions; Dialing Phone Numbers; SOS Emergency Call Activation

15
5. General Functions
5.1 Dial a Number
1) In Idle mode, enter an area code and telephone
number,andpresstheSendkeyandconrmcalltodial
the number. Press the End key to end the call.
International Call:
Press the “*” key twice, the screen shows a “+” symbol.
Enter the country code, area code and telephone
number,andpresstheSendkeyandconrmthecall.
Dial an Extension Number:
After entering the operator’s number, press the “*”
key three times, the screen shows a “p” symbol, then
enter the extension number, and press the Send key to
conrmandcallout.
Dial a Number using the Phonebook
1) In Idle mode, press the Send key to enter Main menu,
select Phonebook and press the Send key to access
the Phonebook List. You can search for your required
contact by entering the initial letter of the name then
usingtheUp&Downkeytondyourdesiredname.
2) Press the Send key to and select “call” to dial the
number.
5.2 Dial SOS Number
1) Press and hold the SOS button for 3 seconds to start
the function, it will send the SOS message to the phone
oftherstSOSnumberandthendialit.Ifthecallfails,
then the next saved number is called and so on.
If it connects successfully, it will switch to the
loudspeaker mode automatically.
2) After the SOS function starts and you want to stop it,
press and hold the End key to disconnect.