Do not open the machine to avoid electric shock. Only the maintenance staff who
was trained by the company and certificate qualified can open it.
Do not hot plugging the HDMI socket. It will shorten the life of the machine and
display of HDMI socket.
Placement
Please put the machine on the flat surface, and keep it far away from the direct
sunshine; also, prevent from high heat, humidity and frequent vibrate, or it may cause
the damage of body and internal parts, then shorten the life of the machine.
The place should be far away from the heat source, such as heating, heat regulator,
oven or other heating products.
Use the product in the dry and ventilated surrounding to avoid from breaking down.
To avoid distortion and abnormal sound, do not put heavy things on the machine.
When placing the machine, please maintain a minimum distance of 15 cm from the
wall.
Electrical source
Please do not use the too high voltage or the machine may cause fire. You should
correctly connect the AC power cord, and make sure the power cables are not
damaged. Do not pull, bend the power cord or place heavy objects on the power cord.
The power could not be over loaded on the socket. You should be careful about the
extended line and integrated socket. These may be the reasons that cause fire.
Please do not clamp the AC between the machine, wall and bookshelf.
To prevent damage caused by lightning, you should unplug the power when not using
the machine.
Cleaning
Before cleaning the machine, unplug the power cord.
Use the slightly damp, soft cloth, and do not use the liquid detergent and spray
cleaners. For stubborn stains, clean with a soft cloth moistened with water, wring
clean, and then wipe the machine with a soft, dry cloth.
Do not use any solvents, such as thinner and gasoline solvents, as these solvents
can damage the machine’s surface.
Moisture proof
When using this machine, you should try to avoid damp places, such as in a wet
basement.
To Next Page
Loading...