4
Pairing
Easy Pairing (First Time Pairing)
1.Before using the speaker for the rst time, you must pair it with a bluetooth-
enabled device(Cellphone,Pad,Laptop.eg).
2.Turn on the bluetooth function on the device.
3.Push the Power button to the ON position on the BBH-939,Then the speaker
enters Pairing Mode, the LED indicator will blink with the red and blue light,you
will also hear a voice prompting 'Power on'.
4.Search bluetooth device and Select BBH-939 from the list of devices and pair
it with your device.Enter 0000(4 Zeros) if needed.
5.Once the pairing has been completed successfully, you will hear the voice
prompting connected. The BBH-939 Speaker will automatically turn o if not
nish pairing within 3 minutes.
6.Pairing Failed:Please turn o your speaker and repeat the steps above.
7.Automatic Connect: It will connect to the last connected device automatically
when it turns on
Automatically Shutdown
The speaker will be shut down automatically 5 minutes later once the
speaker is out of range(33 ft)
Battery Status Alert
Battery Status High Low
Voice Prompt Battery High Battery Low
LED lndicator
Blinking Blinking
Blue Red
3 times 3 times
BBH-939
BBH-939-B标-说明书-9-19.indd 4 2020/4/17 18:11:32
To Next Page
Loading...