Blueridge BMKH12MCC - Quiet Function Setting

Wired Remote Controller XK19
14
3.13 Quiet Function Setting
the “Quiet” function option.
Fig. 16 Setting of Quiet Function
Turn on quiet function:
Under unit on status, press Function button on the panel to select “Quiet” function option. When
“Quiet” or “Auto quiet” flashes, it enters quiet function setting mode. Press ▲ or ▼ button to switch
between “Quiet” and “Auto quiet” function. Then press Enter/Cancel button to activate this function.
Cancel quiet function:
If quiet function has been set, press Function button on the panel to select “Quiet” function option.
When “Quiet” or “Auto quiet” flashes, if you press Enter/Cancel button without pressing ▲ or ▼
button, quiet function will be canceled; if you press Enter/Cancel button after pressing ▲ or ▼
button, quiet function will be activated.
Turn on the unit with the “Quiet”
function deactivated
Press the “Function” button to select
the “Quiet” function option.
Press ▲ or ▼ to select the desired
type, “QUIET” or “AUTO QUIET”.
Press the Enter/Cancel button to
activate this function.
Press the “Enter/Canel” button to
deactivate this function.
Press the Function button to select
QUIET
AUTO
QUIET
AUTO
QUIET
AUTO
QUIET
AUTO