Blueridge BMY24HH22C User Manual (English)

Questions and Answers:

J
Jennifer IngramAug 9, 2025
Why is my Blueridge Air Conditioner not cooling properly?
- K
  Kimberly SmithAug 9, 2025
  If your Blueridge Air Conditioner isn't cooling well, several factors could be the cause. The temperature setting might be higher than the room's ambient temperature. The heat exchanger on either the indoor or outdoor unit could be dirty, requiring cleaning. A dirty air filter can also reduce performance; remove and clean it as instructed. Obstructions blocking the air inlet or outlet should be removed after turning the unit off and then back on. Ensure doors and windows are closed to prevent heat entry, and use curtains to block excessive sunlight. Reduce the number of heat sources in the room, and check for refrigerant leaks, resealing if necessary and topping off the refrigerant. Finally, ensure the SILENCE function is deactivated.
L
Lisa WalshAug 20, 2025
What to do if Blueridge Air Conditioner does not turn on?
- R
  Rachel BrownAug 20, 2025
  If your Blueridge Air Conditioner doesn't turn on, check the following: If there was a power failure, wait for the power to be restored. If the power is off, turn it on. Also, try replacing the fuse or the batteries.
P
Phillip KelleyAug 30, 2025
Why does my Blueridge BMY24HH22C keep turning on and off?
- K
  Kevin DodsonAug 30, 2025
  If your Blueridge Air Conditioner starts and stops frequently, you should check for leaks and recharge the system with refrigerant. Another solution is to evacuate and recharge the system with refrigerant. You may also need to replace the compressor or install a manostat to regulate the voltage.

Blueridge BMY24HH22C Specifications

General

SEER Rating	22
HSPF Rating	10
Refrigerant	R-410A
Seasonal Energy Efficiency Ratio (SEER)	22
Heating Seasonal Performance Factor (HSPF)	10
Phase	1
Cooling Capacity	24000 BTU
Heating Capacity	24000 BTU
Voltage	208/230V