Bluerock Tools 40A - Safety; PRE-OPERATIONAL SAFETY CHECKS; OPERATIONAL SAFETY CHECKS

40A GRINDER/SANDER/POLISHER
1
Safety
DO NOT USE THIS MACHINE UNLESS YOU HAVE READ THE OPERATING INSTRUCTIONS!
Safety glasses must be worn at all times in
work areas. Use a full face mask whenever
possible.
Long and loose hair must be
contained.
Appropriate footwear must be worn.
Close fitting/protective clothing
must be worn.
Safety gloves should be worn at all times and
jewelry must not be worn.
Hearing protection should be worn
when using this machine.
Read operational manual prior to use.
Dust mask must be worn while
using this machine.
PRE-OPERATIONAL SAFETY CHECKS
Ø Examine the power cord and plug for damage.
Ø Examine the body of the machine and inspect for damage or defects.
Ø Examine the sanding belt to insure it is operable.
Ø Ensure that the sanding belt is correctly attached to the machine.
Ø Make certain the on/off switch is in the off position.
OPERATIONAL SAFETY CHECKS
Ø ONLY to be operated by qualified personal who have read instructions.
o NOTE: Failure to read and follow instructions could result in electrical shock, fire, property damage and/or
serious injury!
Ø DO ensure all non-essential people are clear of the immediate work area.
Ø DO keep body parts, clothing & power cords clear of turning pieces. Stay alert and use common since when using
this tool.
Ø DO allow machine to reach operating speed before contacting with surface.
Ø DO use both hands when using this machine.
Chapter
1