Bluerock Tools 808 series User Manual

SERVICE MANUAL V1.0
808 Series Wire Strippers (Includes MWS-83MD, MWS-808,
MWS-808D, MWS-808PD & MWS-808PMO)
Removing/Replacing Blades
CAUTION!! IMPORTANT!! DANGER!! WARNING!!
IF MOTORIZED MACHINE, DISCONNECT MACHINE FROM POWER
BEFORE PROCEEDING!!
Estimated Completion Time: 25 Minutes
Tools Required
17mm Wrench
Adjustable Wrench
Flat punch
Rubber Mallet
Bearing Puller (See Pictures)
© THE NEWMAN TRADING COMPANY LLC DBA BLUEROCK® TOOLS 2018
1100 SW 16 St • Suite D Renton, WA 98057
Phone 206.604.8363 • Fax 425.572.5167
www.bluerocktools.com

Bluerock Tools 808 series Specifications

General

Brand	Bluerock Tools
Model	808 series
Category	Tools
Language	English

Summary

Blade Removal and Replacement

Safety Precautions and Tools Required

Essential safety guidelines and a list of necessary tools for blade maintenance and replacement.

Initial Disassembly Steps

Procedure for removing T-handle bolts, springs, and spring caps from the machine.

Top Cover and Roller Assembly Removal

Steps for removing the machine's top cover, including bolts, spacer tubes, and flat brackets.

Blade Roller Assembly and Bearing Extraction

Instructions for carefully lifting the blade roller assembly and using a bearing puller.

Blade Shaft Component Separation

Procedure for loosening the spanner nut and removing blades and blade spacers from the shaft.

Reassembly Process

Detailed steps for reassembling the blades, bearings, and machine components in the correct order.

Blade Alignment Adjustment

Alignment Adjustment Procedure

Steps to loosen, adjust, and retighten blade alignment bolts for proper cutting channel centering.