01
Thank you for purchasing a BlueSpot product, you can find further information
on our range at www.BlueSpot.uk.com. Please ensure that you are using the
product correctly and that all guidance and cautions are followed in accordance
with the instructions. Please retain these instructions for future reference.
General Information
Please make sure that you read these instructions carefully in order to avoid injury when
using the tool. Follow all health and safety rules and regulations. If in doubt and available
please contact a more knowledgeable source.
DO NOT use if damaged.
• If the tool is damaged do not use as this may cause damage to property or injury.
• As with all vehicle testing and maintenance please use appropriate fixings such as axel
stands or wheel chocks.
• ALWAYS make sure the transmission is in park, wheels are blocked and the parking
brake is ON.
• ALWAYSs dress appropriately and wear the correct eye protection.
• ALWAYS keep a dry chemical fire extinguisher nearby.
• ALWAYS operate the vehicle in a well-ventilated area.
• Take great care around HOT or MOVING components.
• NEVER smoke around fuel components or the battery.
• NEVER disconnect any electrical connection with the ignition switch ON unless you are
instructed to do so.
• Avoid touching the electrical connector pins.
• DO NOT allow extension cords for power tools to lie on, near or across any vehicle
electrical wiring.
• Maintain the tool in good and clean condition for best and safest performance.
• Keep the work area clean, uncluttered and ensure there is adequate lighting.
• Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip
shoes.
• Keep children and unauthorised persons away from the work area.
Refer to vehicle manual and contact manufacturer if unsure. These instructions are
intended as a guide only.
Safe use
To Next Page
Loading...