SETTING THE TIME
NOTE: Before setting the TIME make sure all of the non-clock functions (BLUETOOTH, FM,
AM) are turned OFF. If any of the non-clock functions are playing, turn the function OFF by
simply pressing & holding the FUNCTION button (1).
1. Press & hold the CLOCK / MEMORY button (2) until the time flashes on the LED
display. Once the time is flashing you can release the CLOCK / MEMORY button (2).
2. Press the PREV /
HOUR button (6) repeatedly until the correct HOUR is shown on
the LED display.
• NOTE: The “AM” Indicator
Light (A) will turn ON when the hour is set to AM.
For PM hours the “AM” Indicator Light (A) will turn OFF.
3. Press the NEXT / MINUTE button (7) repeatedly until the correct MINUTE is shown
on the LED display.
12:34
B
C F
E
A
EXPLANATION OF DISPLAY LIGHTS
LETTER DESCRIPTION
A
B
C
D
E
“AM” INDICATOR LIGHT
ALARM-1 BUZZER INDICATOR LIGHT
ALARM-1 RADIO INDICATOR LIGHT
ALARM-2 BUZZER INDICATOR LIGHT
ALARM-2 RADIO INDICATOR LIGHT
F
D
BLUETOOTH INDICATOR LIGHT
4
NOTE: Some buttons have multiple functions based on if the function requires a
“Press” (Press & Immediately Release the button) command or a “Press & Hold”
(Press & Hold the button for 1-2 seconds) command.
To Next Page
Loading...