EasyManua.ls Logo

BlueSun PV - Scope; Introduction to Installation Manual; Overview; Applicable Products

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
1 Scope
This installation manual specifies the installation and maintenance requirements for crystalline silicon PV
double glass modules (hereinafter referred to as "modules") manufactured by Bluesun Solar Co.,Ltd.
(hereinafter referred to as "Bluesun").
This installation manual is intended for the installation and maintenance of modules, and helps customers
to correctly install the photovoltaic power generation system, so that the design system can realize its potential.
2 The introduction of installation manual
2.1 Overview
Thanks for choosing the crystalline silicon PV module of Bluesun Solar Co.,Ltd. This manual contains
important electrical and mechanical installation information. For correct installation and stable power output,
please install and maintain the modules Carefully read and understand all installation instructions in the
manual, and keep this manual in a safe place for future reference (care and maintenance) and in case of sale or
disposal of the modules.
This manual does not constitute a warranty, expressed or implied. Bluesun does not assume responsibility
and expressly disclaims liability for loss, damage, or expense arising out of or in any way connected with
installation, operation, use or maintenance of modules.
The PV modules should be installed in accordance with all safety precautions and local laws and
regulations of this manual and should be installed and serviced by qualified personnel with knowledge of the
mechanical and electrical requirements of the system.
The mechanical and electrical installation of the PV modules shall be made in accordance with applicable
laws and regulations, including electrical, construction and electrical connection requirements. These
regulations vary depending on the installation site, such as building roofs, surface mounts, in-vehicle
applications, and so on. The requirements may vary depending on the installation system voltage, the use of
DC or AC. Please refer to the relevant local laws and regulations.
Any questions, please contact with the salesman or customer service personnel of Bluesun solar for
further explanations.
2.2 Applicable products
This manual is intended for use with the following modules:
Double glass modules: 72 version of the series, 60 version of the series(Where 'xxx' denotes power)
Horizontal double glass modules:

Related product manuals