EasyManua.ls Logo

Bluetti AC200P L - Page 17

Bluetti AC200P L
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7.3 Car Charging
Connect the AC200P L to the vehicle's 12V cigarette lighter port via the DC input cable and
car charging cable. The AC200P L can charge at a maximum of 96W, and it'll automatically
stop charging once it's fully charged.
Note: Make sure your vehicle meets the following conditions for charging:
The vehicle is capable of supplying power.
The vehicle's engine is running during the charging process.
7.4 Generator Charging
Connect the AC200P L to a generator via the AC charging cable. The AC200P L also
automatically stops charging when it's fully charged.
Attention:
The AC200P L has a low-voltage disconnect function designed to protect your
vehicle's battery during charging. If the input voltage drops below 10.5V, the unit
will automatically stop charging to prevent over-discharging and potential
damage to the battery.
JUST POWER ON 17
EN