1. Charge the unit before first use.
2. Do not use solar panels with open circuit voltage higher than 28V. Solar input voltage range
for the unit is DC 12V~28V.
3. Charge the unit when the SoC drops below 5%. If the SoC drops to 0, power off the unit and
charge it for at least 30mins before restarting.
4. The unit is for off-grid use only. Do not connect its AC output to the grid.
5. If not used for more than 3 months, charge the unit to 40%~60% SoC and store it with the
power off. For optimum battery life, discharge and charge the unit every 3 months.
7. This product must be grounded before operation.
Connect a grounding cable (recommended 14AWG（1.5mm
2
）/105
o
C/yellow-green color) to the
grounding terminal of AC60P. Fasten the grounding screw (M4*12) to fix the cable.
Warning
To Next Page
Loading...
