BLUM SERVO-DRIVE uno

SERVO-DRIVE uno will neither
work by pulling nor pushing.
SERVO-DRIVE uno will only
work when pulling – not when
pushing.
Blum transformer is not
connected to the outlet.
Power supply interupted.
Blum transformer is defective.
Cabling is defective.
Object is obstructing path.
Blum distance bumper is
missing or defective.
Max. fill height of drawer has
been exceeded.
SERVO-DRIVE uno is defective.
➢ Plug in the Blum
transformer to the outlet.
➢ Check the circuit
breaker/fuse box.
➢ If necessary, contact an
authorised electrician.
➢ Replace the Blum
transformer.
➢ Remove the obstruction.
➢ Attach or replace the Blum
distance bumper.
➢ Open the drawer manually.
➢ Remove the items that are
too high from the drawer.
➢ Replace the drive unit.
Problems Possible cause Remedy
10