BLUM SERVO-DRIVE uno - Electrical Motion Support System Operation; Drawer Opening Mechanism; Leaning Protection Functionality; Parameters for Error-Free Functioning

EN
Input voltage: ................................................................................................. 100–240 VAC / 50–60 Hz
Input voltage Japan: ............................................................................... 100 VAC ±10 % / 50 and 60 Hz
Input current: ................................................................................................................................. 0.3 A
Output voltage: .......................................................................................................................... 24 VDC
Nominal output current (max. 2 drive units): .................................................................................0.5 A
Ambient temperature: ......................................................................................................... 0 to +40°C
Protection category: ....................................................................................................................... IP40
Power consumption in standby mode (without load): ........................................................... <0.075 W
Supply voltage: .......................................................................................................................... 24 VDC
Rated current: ................................................................................................................................. 2.0 A
Power consumption in standby mode: ....................................................................................... 0.12 W
Ambient temperature: ........................................................................................................... 0 to +50°C
Protection category: ........................................................................................................................ IP20
Technical data
Should only be used in dry, enclosed rooms.
Blum transformer Z10NA300.xx
SERVO-DRIVEuno for TANDEM / TANDEMBOX drive unit
Spare parts
Spare parts can be ordered from your distributor or furniture supplier.
Disposal
SERVO-DRIVE uno removal may only be carried out according to the separate installation instruc-
tions. All SERVO-DRIVE uno electronic components should be disposed of in a separate collection for
electrical appliances as per local regulations.
11