BLUM SERVO-DRIVE uno

EN
Document-Nr Title Date of issue
EN 60335-1:2012
+A11:2014
Household and similar electrical appliances – Safety
– Part 1: General requirements
2012-10-01
EN 50581:2012 Technical documentation for the assessment of electrical and
electronic products with respect to the restriction of hazardous
substances
2013-02-01
In addition the following standards for the product types Z10NA200, Z10NA300, Z10NE020 and Z10NE030 were
used
EN 60950-1:
2014-08
Information technology equipment - Safety
– Part 1: General requirements
2014-08-01
In addition the following standards for the product type 21xA0x1 and modules 21P5020, 21.A00L33.xx plus
Z10C5007 were used
ETSI EN 300 440-2 V1.4.1 Electromagnetic compatibility and Radio spectrum Matters (ERM)
- Short range devices
- Radio equipment to be used in the 1 GHz to 40 GHz frequency
range
– Part 2: Harmonized EN covering the essential requirements of
article 3.2 of the R&TTE Directive
2010-12-29
EN 301 489-3 V1.6.1 Electromagnetic compatibility and Radio spectrum Matters (ERM)
Electromagnetic compatibility (EMC) standard for radio equipment
and services
– Part 3: Specific conditions for Short-Range Devices (SRD) opera-
ting on frequencies between 9 kHz and 246 GHz
2013-10-12
EN 301 489-1 V1.9.2 Electromagnetic compatibility and Radio spectrum Matters (ERM)
- Electromagnetic compatibility (EMC) standard for radio equipment
and services
– Part 1: Common technical requirements
2012-04-11
The CE marking was affixed in 09.
For the commercial use of SERVO-DRIVE for AVENTOS the conformity of the furniture with the Machinery Directive
2006/42/EU should be confirmed prior to commissioning.
Signed for and on behalf of:
Julius Blum GmbH
Hoechst, 2016-04-26
Graduate engineer (FH) Hermann Weissenhorn, Head of Engineering
http://www.blum.com/compliance/
15