72
EN
Manual mode
To set the manual mode, repeat the same steps as for „Automatic mode“.
Operating the lawnmower in automatic mode
Enter your pin when switching on the lawnmower.
1 Enter the pin (if you have entered one) using the number keys.
2 Press the OK button.
The automatic mode is displayed on the screen. In automatic mode, the
lawnmower can start from a location of your choice at a time of your choice.
Make sure you press the STOP button before making the following settings:
1 Press the OK button.
2 If „Auto“ appears on the screen, proceed to step 3. If „Man“ appears on the
screen, press the HOME button and select „Auto“ using the arrow keys.
Press the OK button to conrm.
3 Close the control panel cover. The settings are now complete. If the lawn
mower is in the charging station at the time you make the setting, the lawn
mower will start mowing at the time you set. If the mower is already in the
lawn, it will automatically resume operation.
Note: For more information on password settings, refer to the „System
settings“ chapter.