80
EN
Cleaning
Note: Never use a high-pressure cleaner to clean the lawn mower.
• Be sure to keep the mower clean. Lawnmowers that have not been
properly cleaned. Can conquer hills harder and need more energy.
• It is recommended to clean the underside of the lawn mower with a brush
and a water-based spray and the housing of the lawn mower with a soft
and damp cloth.
Blade change
1 Turn off the lawnmower.
2 Wear protective gloves.
3 Turn the lawnmower over.
4 Turn the mudguard so that its hole is ush with the blade screw.
5 Unscrew the blade. Use a screwdriver to do this.
6 Pull the protective plate and the blade plate apart and remove the blade
and screw.
To Next Page
Loading...
