26
EN
MAINTENANCE
Cleaning
1. Use a damp soapy wrung out cloth to clean the exterior and cylinder
storage area of your heater.
2. Make sure that no water gets onto the burners or pilot/light area. Wipe
the heater completely dry before use.
3. Do not use abrasive cleaners as they may damage the quality of paint
nish.
Maintenance
1. Check exible tubing between regulator and heater regularly and replace.
If perished, worn or damaged,
2. It is recommended that the heater be serviced every year by a competent
person in accordance with the Gas Safety (installations and use)
Regulations 1998.
3. If any parts need replacing, they should be replaced only with the correct
parts as supplied by the original manufacturer.
4. If no use after a long time term,user should check it if mobile heater
does work normally,for example,exible tubing and regulator are till in
valid time,the gas connection from cylinder to heater is without any
leakage,the heater can be ignited without light-back,without big noise
inside heater.
Storage
1. Disconnect the cylinder and remove from the appliance.
2. Store cylinders in a well-ventilated area away from combustible material.
Storage should preferably be outdoors. Cylinders must not be stored be
in a basements or in high-rise ats.
3. The heater should be covered in a dry, dust-free area in its original
packaging.
To Next Page
Loading...
Need help?
General