Need help?Do you have a question about the blupura BLUBAR and is the answer not in the manual?
Information on recyclable packaging materials and proper disposal guidelines.
Guidelines for correct product disposal according to WEEE directive.
Details on the natural refrigerant gas used and its benefits.
Lists various certifications and approvals obtained by the product.
Materials used comply with drinking water safety standards.
Electrical safety directives and grounding requirements.
Identifies the dispensing taps or buttons on the front panel.
Indicates the removable cover on the top of the unit.
Highlights the front plexiglass panel with lighting.
Describes the drip tray and its integrated drainage.
Notes the presence of adjustable feet for stability.
Specifies inlet pipe joints for ice bank and water.
Points out the inlet pipe for CO2 gas.
Shows the indicator for the ice bank fill level.
Identifies energy saving button and main power switch.
Locates the adjustable thermostat for temperature control.
Indicates the unit's power cable.
Identifies the dispensing taps or buttons on the front panel.
Highlights the front plexiglass panel with lighting.
Describes the drip tray with its grid.
Refers to the main front and rear panels of the unit.
Notes the presence of wheels and adjustable feet.
Specifies the waste pipe for the drip tray.
Identifies the water inlet pipe with size details.
Shows the outlet pipe for ice bank overflow.
Indicates the unit's power cable.
Identifies the control for dispensing cold sparkling water.
Identifies the control for dispensing cold still water.
Labels the buttons for dispensing cold sparkling water.
Labels the buttons for dispensing cold still water.
Identifies the energy saving function button.
Explains the meaning of the blue LED indicator.
Explains the meaning of the green LED indicator.
Describes default dispensing volumes for each button.
Details procedure for programming custom dispensing volumes.
Explains alarm for low CO2 pressure and resolution.
Describes activation, function, and deactivation of energy saving mode.
Provides dimensional data for the BEER TAP 30 model.
Provides dimensional data for the BEER TAP 80 model.
Provides dimensional data for the BEER TAP 150 model.
Provides dimensional data for the I.T. 150 model.
Instructions for unpacking, checking for damage, and initial handling.
Guidance on proper placement, ventilation, and handling.
Instructions for filling the ice bank with water for specific models.
Steps for connecting the power cable and turning on the unit.
How to adjust the thermostat and handle freezing issues.
Recommended methods and products for cleaning the exterior.
How to clean the drip tray, including dishwasher use.
Daily cleaning instructions for dispensing nozzles.
General| Category | Water Dispenser |
|---|---|
| Material | Stainless Steel |
| Cold Water Temperature | 5-10°C |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Water Types | Sparkling |
To Next Page
