blupura BLUTOWER - Electrical Connection; Connecting Power and Activating Unit; Initial Air Release and Pump Start

19
Fig. 19.2
Fig. 19.1
Electrical connection
The connections must comply with local
regulations. The grounding of the unit is
a legal requirement.
Connect the tap to the electrical box (2)
through the cable (1), insert the plug
(3) into a wall outlet and select the “I”
position on the main on/off rocker switch
(4). The electrical tap is now activated
and the POWER ON led L.1 is on.
Press the “Sparkling Water” button (P.1)
in order to release any air in the circuit
and to allow the pump on the under
counter water cooler to start and fill the
carbonator with water.
1
4
2
3
Fig. 19.3
P. 1
L.1