BluStream C44-KIT - Page 17

C44-KIT USER MANUAL
Contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk
17
Blustream PC Configuration Soware
The Blustream C44-KIT matrix units can be configured using the Blustream matrix PC configuration soware.
Please download the specific soware and PC soware manual.
Blustream Web Browser Interface
The Blustream C44-KIT matrix unit can be both controlled and configured using the in-built web-server.
The C44-KIT matrix must be connected to an active network router / switch and it is advised that the matrix is given
a static IP address. You can configure the network settings of the matrix using either the Web Browser Interface
(Blustream matrix products are shipped with the network set to DHCP) or using the Blustream PC Configuration
Soware (downloadable from the Blustream Drivers & Protocols link on the product web page). If a router is not
present and no IP address is assigned to the matrix, the default IP address of the matrix will be 192.168.0.200.
For detailed instructions on using the Blustream Web Browser Interface please download the specific soware manual.