Need help?Do you have a question about the BluStream MX42AB and is the answer not in the manual?
General| Input Ports | 4 |
|---|---|
| Output Ports | 2 |
| HDCP Support | 2.2 |
| HDBaseT Output Distance | Up to 70m |
| Audio Matrix | Yes |
| 4K UHD Support | Yes |
| IR Routing | Yes |
| Video Resolution | 4K UHD @ 60Hz |
| Control Method | IR, RS-232, TCP/IP |
| Audio Inputs | 4 |
| Audio Outputs | 2 |
| PoE | Yes |
Describes the components and indicators on the front panel of the MX42AB.
Details all input, output, and control ports located on the rear of the MX42AB.
Explains how to use the remote control for output selection and EDID setup.
Lists available EDID settings and their corresponding DIP code configurations.
Lists the technical specifications of the MX42AB device.
Details the pinout configuration for RS232 serial communication.
To Next Page
