MX42AB USER MANUAL
03
contact
Introduction
Front Panel
•
Supports resolutions up to
1080p@60HZ,48-bit deep
color, 4K@60 hz
FEATURES:
• Allows any source to be displayed on
multiple displays at the same time
• Allows any HDMI display to view any
HDMI source at any time
• Dolby TrueHD and DTS-HD master
audio pass through HDMI output
• Advanced EDID management for
rapid integration of sources and
displays. See below table
• Extract audio from HDMI output via
RCA (S/PDIF) and L/R analogue audio
(From PCM audio on the HDMI feed).
•
Multiple switching mode, front panel
control, IR remote control and
RS-232 control
• Easy installation with rack-mounting
ears
• Full 3D pass- through.
• HDCP compliant
1 IR receiver window – Receive the IR from the remote control of MX4
AB.
2
Power LED indicator – Indicate the power state of the matrix.
3 HDMI output selection button 1 – Press to select the desired source input
for
4 Input LED indicator – Indicates the selected source in the zone output.
Our MX42AB 4K HDMI matrix individually distributes four HDMI
sources to two displays enabling all sources to be viewed seamlessly
as
required within a matrix configuration. The unit transmits all HDMI
resolutions up to and including 4K. The 4-Way matrix also includes the
advanced features of audio breakout, RS-232 control and EDID
management.
2
1 3 4
3
4
To Next Page
Loading...
