Need help?Do you have a question about the BluStream C66CS and is the answer not in the manual?
General| HDCP | Yes |
|---|---|
| HDCP version | 2.0 |
| Product type | AV matrix switcher |
| Supported chroma subsampling | 4:4:4, 4:2:0 |
| AC input voltage | 100 - 240 V |
| Power consumption (max) | - W |
| Storage temperature (T-T) | -25 - 70 °C |
| Operating temperature (T-T) | -5 - 55 °C |
| Control type | Buttons |
| Housing color | Black |
| Rack capacity | 1U |
| Remote (IR) input | 7 |
| Remote (IR) output | 6 |
| Ethernet LAN (RJ-45) ports | 1 |
| Built-in display | - |
Weight and Dimensions| Depth | 377 mm |
|---|---|
| Width | 437 mm |
| Height | 44 mm |
| Package weight | 6250 g |
Identifies and describes the function of each component on the front panel.
Details the various input/output ports and connectors found on the rear of the unit.
Configures Extended Display Identification Data (EDID) settings for each input via RS-232.
Explains how to use front panel buttons for input/output selection and other control features.
Details Blustream IR emitters, receivers, and cables for remote control operations.
Guides on proper CAT cable termination (T568B) and quality for HDBaseT™ connections.
Explains the meaning of yellow and green status LEDs on HDBaseT™ RJ45 ports.
Details Guest, User, and Admin account types and their respective permissions within the Web GUI.
Describes how a guest user can change inputs/outputs and power the Matrix on/off via the Web GUI.
Explains how to select inputs/outputs, save, and recall presets via the Web GUI Control Page.
Details how to name inputs and select EDID settings for each input via the Web GUI.
Explains how to name outputs and enable/disable Power over Cable (PoC) for each output.
Configures baud rate, terminator, and data format (Hex/ASCII) for local RS-232 commands.
Enables/disables RS-232 for HDBT control, automates display processes, and sets command parameters.
Configures static IP or DHCP, subnet mask, gateway, and Telnet access for network control.
Manages up to 8 users, allocates permissions, and configures access to Web GUI pages and Matrix functions.
Controls front panel button lock, front panel IR window, and performs factory resets of the Matrix.
Explains the operation of the remote control buttons for input/output selection and PTP function.
Provides a comprehensive list of IR commands, their NEC/HEX codes for controlling the Matrix.
Details the video connectors, ports, rack mounting, dimensions, weight, and operating conditions.
Lists all items included in the package for both the C88CS and C66CS models.
Lists common RS-232 commands for status, power, and output control, with usage examples.
Highlights common errors like carriage return and spacing issues when sending RS-232 commands.
Lists RS-232 commands for saving/changing EDID, preset management, and PoC control.
Details CEC commands for controlling sources (Input) and displays (Output) via the Matrix.
Provides a step-by-step guide on how to update the Web GUI firmware via the Blustream website.
Guides on logging into the Web GUI and uploading the main MCU firmware file (.app).
Details FCC regulations and precautions for digital device operation and interference.
Covers Canadian IC compliance requirements and proper product disposal instructions.
Illustrates a typical connection setup for the C88CS matrix with sources and displays.
To Next Page
