C44CS-KIT/C66CS/C88CS USER MANUAL
contact: support@blustream.com.au | support@blustream-us.com | support@blustream.co.uk
15
Admin Page
The Admin Page allows the administrator to configure up to 8 users including a guest user. Individual users can adjust
their own credentials via this page.
The Admin, or Users who have been given Admin permissions, are able to allocate permissions to Users. These
permissions include allowing or disabling access to pages contained within the web-GUI, as well as allowing or
disabling access to each input or output of the Matrix.
The Admin Page also allows the Front Panel buttons of the Matrix to be locked or unlocked, enable or disable the Front
Panel IR window, as well as Factory Reset the Matrix to default.
Please note:
To enable a User and create password for a user account, complete all 4 text fields under the User section:
Name, Current Password, New Password and Confirm New Password.
For all users, the default password is the same as their name (all lower case).
For example: User1 password is user1, User2 password is user2, etc...
To change user2 password to 12345, complete the following steps:
1. Ensure that the User Authorisation button is set to On for User 2
2. Select the User 2 radio button
3. Enter Name as User2 (or the user’s name)
4. Enter Current Password as user2
5. Enter New password and Confirm New Password as 12345
6. Select the ‘Save’ button at the bottom
To Next Page
Loading...
