08
www.blustream.co.uk | www.blustream.com.au
CUSTOM PRO MATRIX USER MANUAL
Custom Pro Matrix Input Boards
PRO-IN2H2V - 4-Way VGA & HDMI 2.0 Input Board (4K 60Hz 4:4:4 - 18Gbps / WUXGA)
• 2 x HDMI 2.0, female
• 2 x VGA, DB15 - VGA signals up to 1920x1200 (WUXGA) @60Hz supported and converted within the card to
1920x1080 at the same refresh rate as the native signal.
Please Note: the associated audio inputs for the VGA connections are the L/R inputs on the matrix communication
board (supplied within chassis).
PRO-IN2H2TCS - 4-Way CSC HDBaseT™ & HDMI 2.0 Input Board (4K 60Hz 4:4:4 - 18Gbps)
• 2 x CSC HDBaseT™, RJ45
• 2 x HDMI 2.0, female
• Supports 70m at 4K 60Hz 4:4:4, or 100m at 1080p when used with the HEX100CS-TX (sold separately)
• HEX70CS-TX can be used where CAT cable distance is less than 40m at 4K 60Hz 4:4:4, or 70m at 1080p
Please Note: PoC (Power over Cable) is not supplied from the HDBaseT™ input ports. HEX70CS-TX or HEX100CS-TX
units must be powered locally using a Blustream 12V 2A power supply (part code: PS122) which must be purchased
separately.
1 VGA Inputs
2 HDMI Inputs
1 HDBaseT™ Inputs (RJ45)
2 L/R 3.5mm stereo audio breakout
3 IR RX 1 - 3.5mm Mono 5V IR output for routed control of remote source hardware
4 HDMI Inputs
1
2
2 3 41
To Next Page
Loading...
