08
www.blustream.co.uk | www.blustream.com.au
CUSTOM PRO MATRIX USER MANUAL
Custom Pro Matrix Input Boards
PRO-IN4HDA - 4-Way HDMI 2.0 Input Board with Dante
• 4 x HDMI 2.0, female
• L/R 3.5mm stereo jack audio breakouts - allow for 2ch source audio to be sent to separate audio distribution
system. Please Note: audio breakout does not down-mix multichannel audio to 2ch.
• Dante embedding / de-embedding connectivity. Send any of the 4 x stereo audio inputs (de-embedded from the
incoming HDMI signal and send into a Dante ecosystem. Embed audio from within a Dante network onto the HDMI
incoming video.
PRO-IN2H2TCS - 4-Way CSC HDBaseT™ & HDMI 2.0 Input Board (4K 60Hz 4:4:4 - 18Gbps)
• 2 x CSC HDBaseT™, RJ45
• 2 x HDMI 2.0, female
• Supports 70m at 4K 60Hz 4:4:4, or 100m at 1080p when used with the HEX100CS-TX (sold separately)
• HEX70CS-TX can be used where CAT cable distance is less than 40m at 4K 60Hz 4:4:4, or 70m at 1080p
Please Note: PoC (Power over Cable) is not supplied from the HDBaseT™ input ports. HEX70CS-TX or HEX100CS-TX
units must be powered locally using a Blustream 12V 2A power supply (part code: PS122) which must be purchased
separately.
1 HDBaseT™ Inputs (RJ45)
2 L/R 3.5mm stereo audio breakout
3 IR RX 1 - 3.5mm Mono 5V IR output for routed control of remote source hardware
4 HDMI Inputs
1
2
2 3 41
3
1 HDMI Inputs
2 Stereo audio breakout
3 Dante connection, RJ45, female
To Next Page
Loading...
