BluStream Multicast ACM200 - Page 2

ACM200 API DEVELOPMENT
02
www.blustream.co.uk / www.blustream.com.au
Introduction
FEATURES:
• Web interface module for configuration and control of the Blustream Multicast system
• Intuitive 'drag & drop' source selection with video preview feature for active monitoring of system status
• Advanced signal management for independent routing of IR, RS-232, USB/KVM, audio and video
• Auto system configuration
• 2x RJ45 LAN connections to bridge existing network to Multicast video distribution network, resulting in:
- Better system performance as network traic is separated
- No advanced network setup required
- Independent IP address per LAN connection
- Allows simplified TCP / IP control of Multicast system
• RS-232 integration for control of Multicast system
• IR integration for control of Multicast system
• PoE (Power over Ethernet) to power Blustream product from PoE switch
• Local 12V power supply (optional) should Ethernet switch not support PoE
• Support for iOS and Android App control
• 3rd Party drivers available for major home control brands
Our UHD Multicast distribution platform allows distribution of HDMI video over a 1Gb Network switch. The ACM200
Control Module allows advanced third party control of the Multicast system using TCP / IP, RS-232 and IR.
The ACM200 includes a web interface module for control and configuration of the Multicast system and features
'drag and drop' source selection with video preview and independent routing of IR, RS-232, Audio and Video.
Pre-built Blustream product drivers simplify Multicast product installation and negate the need for an
understanding of complex network infrastructures.