BluStream SC11HD-V2 - Front Panel Interface; MODE Dip-switches; HDMI Output Port; HDMI LED Indicator

SC11HD-V2 USER MANUAL
04
www.blustream.co.uk
HDMI Output L/R Out Upgrade
Coaxial
Out
Link
Mode
3 2 1
1
0
0
DC 5V
L/R In
HDMI Input EDID
Power Link
3 2 1
1
0
0
Rear Panel
7 8
Front Panel
1 2
Connections:
1
MODE dip-switches - adjust the MODE setting for HDMI output - see page 5 for further details
2
HDMI output - connect to a HDMI display / end point
3
HDMI LED indicator - lit when there is an active HDMI connection to a display / end point
4
Le/Right Analogue Audio Output 3.5mm stereo jack - Extract audio from HDMI input source
NOTE: Source audio must be PCM 2 channel.
5
Coaxial Digital Output - used when audio is de-embedded from HDMI
6
Micro USB port - used for firmware upgrade only
Connections:
7
Power connection – use supplied 5V 1A DC adaptor
8
Le/Right Analogue Audio Input
9
HDMI input - connecto to source device
q
HDMI LED indicator - lit when there is an active HDMI connection from source device
w
EDID dip-switches - adjust the EDID setting for source input - see page 5 for further details
9 11
3 4 5 6
HDMI Output L/R Out Upgrade
Coaxial
Out
Link
Mode
3 2 1
1
0
0
DC 5V
L/R In
HDMI Input EDID
Power Link
3 2 1
1
0
0
10