BM2 BIEMMEDUE Super 160.15 User Manual (English)

Questions and Answers:

M
michael93Aug 5, 2025
What to do if my BM2 BIEMMEDUE Super 160.15 has vibrations and/or abnormal water discharge?
- K
  Kylie GuzmanAug 5, 2025
  If your BM2 BIEMMEDUE Pressure Washer is experiencing vibrations or abnormal water discharge, it could be due to several reasons. First, check the water supply connectors, as the pump might be sucking in air. Next, vent the air by disconnecting the hose if there is air in the hoses. If the suction delivery valves are blocked, unscrew the valve caps, remove, and clean them. If the pump gaskets are worn, contact customer service.
M
melissacamachoAug 10, 2025
Why my BM2 BIEMMEDUE Pressure Washer does not start up?
- C
  christina15Aug 10, 2025
  If your BM2 BIEMMEDUE Pressure Washer isn't starting, it could be due to an absent or inadequate electrical power supply. Check the characteristics of the power line. Alternatively, the electrical protection might have tripped; in this case, contact customer service.
W
wumelissaAug 14, 2025
Why is my BM2 BIEMMEDUE Pressure Washer pump noisy?
- J
  joshua88Aug 15, 2025
  A noisy pump in your BM2 BIEMMEDUE Pressure Washer could indicate worn bearings. Contact customer service in this case.
J
Jasmine NelsonAug 20, 2025
What to do if my BM2 BIEMMEDUE Super 160.15 Pressure Washer has inadequate pressure?

General