BM2 BIEMMEDUE Super 200.15

Questions and Answers

S
Sara PowellAug 8, 2025
What to do if my BM2 BIEMMEDUE Super 200.15 has vibrations and/or abnormal water discharge?
- R
  Richard MedinaAug 8, 2025
  If your BM2 BIEMMEDUE Pressure Washer is experiencing vibrations or abnormal water discharge, it could be due to several reasons. First, check the water supply connectors, as the pump might be sucking in air. Next, vent the air by disconnecting the hose if there is air in the hoses. If the suction delivery valves are blocked, unscrew the valve caps, remove, and clean them. If the pump gaskets are worn, contact customer service.
D
Donna RomeroAug 13, 2025
Why my BM2 BIEMMEDUE Super 200.15 does not start up?
- G
  grodriguezAug 13, 2025
  If your BM2 BIEMMEDUE Pressure Washer isn't starting, it could be due to an absent or inadequate electrical power supply. Check the characteristics of the power line. Alternatively, the electrical protection might have tripped; in this case, contact customer service.
L
lwestAug 18, 2025
Why is my BM2 BIEMMEDUE Super 200.15 pump noisy?
- J
  John MezaAug 18, 2025
  A noisy pump in your BM2 BIEMMEDUE Pressure Washer could indicate worn bearings. Contact customer service in this case.
J
jodi71Aug 23, 2025
What to do if my BM2 BIEMMEDUE Pressure Washer has inadequate pressure?
- T
  Teresa BerryAug 25, 2025
  If your BM2 BIEMMEDUE Pressure Washer has inadequate pressure, the nozzle might be blocked or distorted; try cleaning or replacing it. Another possibility is a dirty or worn valve, in which case you should contact customer service.
A
andre88Aug 28, 2025
Why BM2 BIEMMEDUE Super 200.15 Pressure Washer motor does not start but makes a noise?
- C
  Carlos AdamsAug 28, 2025
  If the motor of your BM2 BIEMMEDUE Pressure Washer makes a noise but doesn't start, it may be due to inadequate voltage. Check the characteristics of the power line.
P
Peter MillerSep 2, 2025
What causes "white" oil in my BM2 BIEMMEDUE Pressure Washer?
- N
  Nicole FreySep 2, 2025
  The "white" oil in your BM2 BIEMMEDUE Pressure Washer indicates seepage of water into the oil, creating an emulsion. In this case, have the seal pack replaced by customer service.

Summary

General Safety Warnings

Working Safely

Essential safety instructions for operating and maintaining the high pressure washer to prevent injury.

Understanding Safety Signs

Explanation of safety symbols used in the manual to warn of dangers, prohibitions, and obligations.

Danger Signs Explained

Details on generic danger signs and specific signs for explosion and fire risks.

Operator Qualifications

Improper Use Risks

Consequences of using the machine incorrectly, including potential injury or damage.

Operator Instructions and Safety

General Safety Warnings for Operators

Crucial safety rules for operating the machine, emphasizing the prevention of injury or damage.

Pre-Operation Checks

Mandatory checks to ensure safety devices are correctly positioned and functional before use.

Operator Training Requirements

Using the High Pressure Washer

Water Connection Guide

Electrical Connection Guide

Starting Up the Machine

Step-by-step guide for powering on and starting the high pressure washer correctly.

Work Method and Controls

Using Detergent for Washing

Routine Maintenance and Safety

Performing Routine Maintenance

Guidance on regular maintenance tasks and the importance of personal protection devices.

Safety Rules for Cleaning

Precautions to observe when cleaning the machine, including electrical components and safe fluids.

Safety for Repairs and Maintenance

Troubleshooting Common Problems

BM2 BIEMMEDUE Super 200.15 Specifications

General

Operating Pressure (min)	30 bar
Operating Pressure (max)	200 bar
Water flow rate	900 L/h
Flow Rate	15 l/min
Power	7.5 kW
Voltage	400V
Pump Type	Triplex plunger pump
Weight	105 kg
Phase	Three-phase