What to do if I have a dry mouth and throat using BMC H-80A Humidifier?
A dry mouth and throat while using the BMC Humidifier may occur if you sleep with your mouth open, allowing pressurized air to escape and causing dryness. A possible solution is to use a chin strap to keep your mouth closed during sleep. For more detailed advice, it's best to contact your physician.
Why is my BMC H-80A so loud and how to fix it?
If your BMC Humidifier is producing excessive noise, it could be due to a few reasons: * The tube might not be connected properly. Ensure it is correctly attached to the connector. * There may be an air leak in the breathing tube. Check for any leaks. * The water chamber might not be correctly connected to the device. Make sure it is properly in place.
Why is the air from my BMC Humidifier too hot?
If the air delivered from your BMC Humidifier is abnormally hot, it might be because the air inlet is partially blocked, reducing airflow into the device. You can try replacing the air filter and cleaning the air inlet. Also, ensure the device is placed in an area with free airflow, at least 20 centimeters away from walls, curtains, or other obstructions.
What to do if I have facial redness from BMC H-80A Humidifier nasal cannula?
If you experience facial redness or inflammation where the nasal cannula contacts your skin while using the BMC Humidifier, consider the following: * The headband might be too tight. Adjust it for a more comfortable fit. * The nasal cannula type may be inappropriate. Contact your equipment supplier to explore other options. * You might be allergic to the cannula material. Consult your physician and equipment supplier for alternatives.
What to do if my BMC H-80A Humidifier doesn't turn on?
If your BMC Humidifier fails to turn on, check these potential issues: * Ensure the power cord is correctly connected to both the device and the power outlet. * Verify that there is voltage by testing a light or another device in the same outlet. If there's a power outage, address that issue. If you suspect the device fuse is broken, contact your equipment supplier for assistance.
Why is the airflow so low on my BMC H-80A?
If your BMC Humidifier is producing very low flow, the air inlet of the device may be blocked. Replace the air filter and clean the air inlet to ensure it is unblocked.
What to do if the screen on my BMC Humidifier is not working properly?
If the screen on your BMC Humidifier displays intermittently or not at all after turning it on, the device's operating system may need a reset. Unplug the power cord, wait 20 seconds, and then plug it back in to restart the system.
Why won't my BMC H-80A start from standby mode?
If your BMC Humidifier is in standby mode and will not start, the operating system may need to be restarted. Disconnect the power cord, wait 20 seconds, and then reconnect it.
What causes nasal, sinus, or ear pain with BMC H-80A?
Nasal, sinus, or ear pain experienced while using the BMC Humidifier may indicate sinus or middle ear inflammation. Contact your physician immediately for medical advice.
General| Brand | BMC |
|---|---|
| Model | H-80A |
| Category | Humidifier |
| Language | English |
Defines the meaning of warning, caution, and important tip indicators.
Specifies the product application and target patient population.
Lists conditions for non-use or cautious use of the device.
Steps to initiate the device and begin patient treatment.
Detailed explanations of all adjustable parameters and their settings.
Overview of device alarms, their grading, and operator responses.
Lists specific alarm messages, their causes, and delay times.
Solutions for common problems encountered with the device and patient.
General guidelines for cleaning and maintaining the device and accessories.
To Next Page
