BMC YH-600B Pro

YH-600B Pro Quick Operation Manual V1.01
3 / 4
3. Recording
(1) Power on device by
pressing and holding
On-Off / OK Button
for approximately
five seconds, enter the
“Record” interface.
(2) If each accessory is connected well, the
“Record” interface can be accessed. The time
notification (0:00:00) in the upper left corner of
the “Record” interface flickers. Press and hold
the On-Off / OK Button for
approximately two seconds to start recording.
Setup
Data
Tools
Record
(3) Stop the recording by pressing and holding the On-Off / OK Button and Shift
Button + simultaneously approximately three seconds. Power off
device by pressing and holding On-Off / OK Button for approximately five
seconds.