Installation and user manual – Dynamicroll® Frigo 2
Installation mode
Before proceeding with the installation operations, it is necessary to check the dimensions of the compartment
with respect to the dimensions of the door. Check for any protrusions.
Out of the door way installation
Fixing
Before installing the door, check that the floor, the existing walls or the support structure have the necessary
strength requirements, suitable to support the weight of the door, also considering the dynamic thrusts due to
normal operation and to any impacts . Possibly make the necessary structural changes that must be made
before giving rise to the installation.
If the door is smaller than 4 × 4 m, connect the columns to the top heading with the appropriate supports and lift
the assembly with a suitable means.
If the door is larger than 4 × 4 m, provisionally fix the columns on the support structure (ex. the wall) and then lift
the top heading with a suitable means. Finally, connect the columns to the top heading using the appropriate
supports.
To Next Page
Loading...