BMS EASY-CHECK FN - Technical Specifications and Accessories; Technical Data Summary; Optional Software and Accessories

Operation
EASY- CHECK FN
Manual
Rev:00 8 / 10
Technical Data
Measuring Technique : Magnetic induction on iron and steel
(ISO 2178)
Eddy current on non-ferrous metals and
non-magnetic steels
(ISO 2360)
Switch over
Measuring Technique : Automatic or manual (NFE)
Measuring Range : Magnetic Induction: 0 – 5000 µm (FE)
Eddy current: 0 – 2500 µm (NFE)
Indication : LCD 3½ digits with floating decimal point
and guides for operation
Resolution : selectable 1.0 µm or 0.1 µm
Accuracy : below 100 µm: ± 1 µm
100 - 1000 µm: ± 1 %
1000 - 2000 µm: ± 3 %
> 2000 µm: ± 5 %
Memory : max. 1000 readings
Statistics : Indication of No.-MIN-MAX-MEAN-STD.DEV.
Power Supply : 1,5V Mignon battery
(1.2V rechargeable battery with charger available)
Recording Data : on steel (FE): one long beep
on non-ferrous metals (NFE): two short beeps
Measuring Probe : swinging by 90°
Dimensions : 108 x 48 x 38 mm
Weight : approx. 100 g
Interface : serial RS 232 C (5 V TTL level)
Baudrate : Printer + PC: 1200 baud
Data/Stop bits : Printer + PC: 7/2
Warranty : Indication unit: 12 months
Measuring probe: 3 months
Optional Accessories
Software Incl. Operation Instructions
• Software TRANSFER
Sends the data and statistics to the computer.
• Software TRANSFER-EXCEL
Transfers the data directly in an existing Excel file.
• Graphic Statistics Software STAT-6
Sends the data and statistics to the computer.
Limit values can be set which are evaluated as line and bar diagrams.