Need help?Do you have a question about the BMW Motorrad R 1200 R 2012 and is the answer not in the manual?
General| Displacement | 1170 cc |
|---|---|
| Bore x Stroke | 101 mm x 73 mm |
| Power | 81 kW (110 hp) at 7, 750 rpm |
| Compression Ratio | 12.0:1 |
| Fuel System | Electronic fuel injection |
| Transmission | 6-speed |
| Final Drive | Shaft drive |
| Rear Brake | Single disc brake, diameter 265 mm, double-piston floating caliper |
| Front Tire | 120/70 ZR 17 |
| Rear Tire | 180/55 ZR 17 |
| Wheelbase | 1, 495 mm |
| Dry Weight | 199 kg |
| Weight, ready to ride, fully fueled | 223 kg |
| Torque | 119 Nm at 6, 000 rpm |
| Fuel Type | Unleaded gasoline |
| Clutch | Single-plate dry clutch, hydraulically operated |
| Gearbox | Constant mesh |
| Frame | Steel bridge frame |
| Front Suspension | Telelever, central spring strut |
| Rear Suspension | BMW Motorrad Paralever |
| Front Brake | Double disc brake, floating brake discs, diameter 320 mm, 4-piston fixed calipers |
| Seat Height | 800 mm |
| Fuel Capacity | 18 liters |
| Engine Type | Air/oil-cooled two-cylinder four-stroke boxer engine with two overhead camshafts, four valves per cylinder and central balancer shaft |
Provides an initial overview of the motorcycle and its documentation.
Explains warnings, instructions, and references used in the manual.
Details optional extras (OE) and accessories (OA) offered by BMW.
Explains how technical data is quoted and potential country variations.
Discusses how BMW maintains quality standards and potential differences.
Identifies key components of the motorcycle from the left side.
Identifies key components of the motorcycle from the right side.
Details the controls and functions of the left handlebar switchgear.
Details the controls and functions of the right handlebar switchgear.
Explains the layout and components of the motorcycle's instrument cluster.
Locates and identifies components found under the motorcycle seat.
Explains the various displays and readings on the multifunction screen.
Provides explanations for symbols shown in the values area of the display.
Details the function and meaning of various warning and telltale lights.
Explains how the service reminder and countdown functions work.
Describes how the remaining range is calculated and displayed.
Explains the ambient temperature display and potential inaccuracies.
Details tyre pressure monitoring (RDC) and how readings are displayed.
Explains the mode of presentation for warnings and their indicators.
Instructions on switching the ignition on/off and locking the handlebars.
Explains the function of the electronic immobiliser and key handling.
Instructions on how to set and operate the motorcycle's clock.
Explains how to select and view different readings on the display.
Details the operation of the motorcycle's lights, including side lights.
Instructions on operating the flashing turn indicators.
Instructions on how to activate and deactivate hazard warning flashers.
Explains the function and operation of the emergency off switch.
Details the operation and settings for the heated handlebar grips.
Instructions on activating and deactivating the ASC function.
Instructions on adjusting the clutch lever and checking its operation.
Guides on adjusting the handbrake lever and checking brake operation.
Instructions on how to adjust the mirrors and mirror arms.
Details on setting and adjusting the spring preload for the rear suspension.
Instructions on setting and adjusting the damping characteristic for the rear wheel.
Explains how to call up and adjust ESA settings for suspension.
Provides guidance on checking tyre pressure and related information.
Instructions on adjusting headlights for driving on different sides of the road.
Instructions on removing and installing the motorcycle seat.
Covers essential safety advice for riders, including equipment and loading.
Provides a checklist of important functions to check before riding.
Detailed steps on how to start the engine and pre-ride checks.
Guidance on the first 1000 km, including speed and throttle recommendations.
Explains how to minimize stopping distance and brake pad wear.
Instructions on how to park the motorcycle safely using the side stand.
Provides information on fuel types, capacity, and safe refuelling procedures.
Steps on how to properly secure the motorcycle for transport.
Explains how the partially integral brakes and ABS system function.
Details how the ASC system works by comparing wheel speeds and adapting torque.
Explains the function of the RDC system and tyre pressure ranges.
Recommends using BMW-approved parts and accessories.
Notes on the use of power sockets, including automatic shutdown.
Instructions on fitting, opening, closing, and removing motorcycle cases.
Instructions on opening, closing, removing, and installing the topcase.
Describes procedures for checking and replacing wear parts.
Lists the components included in the standard toolkit for maintenance.
Guides on checking the engine oil level and topping it up.
Instructions for checking brake operation, pad thickness, and fluid levels.
Guides on checking clutch operation, fluid level, and fluid level marks.
Instructions on checking rims, spokes, and tyre tread depth.
Information on tyre recommendations and the effect of wheel size on systems.
Steps for installing and using the front-wheel stand.
Guides on replacing low-beam, high-beam, parking, tail, and brake light bulbs.
Instructions for removing and installing the motorcycle headlight.
Procedure for jump-starting the motorcycle's battery safely.
Maintenance instructions for the battery, charging, and removal/installation.
Recommends BMW-approved cleaning and care products for the vehicle.
Provides guidelines for washing the motorcycle and removing road salt.
Advice on cleaning plastic parts and avoiding damage.
Explains how to maintain paintwork, remove stains, and use protective treatments.
Recommendations for applying car wax and when to reapply.
Instructions for preparing the motorcycle for storage.
Steps to follow when preparing a stored motorcycle for riding.
Lists common engine starting problems and their rectifications.
Provides torque specifications for various threaded fasteners.
Specifies engine design, displacement, bore, stroke, and output.
Details recommended and alternative fuel grades, capacities, and reserve fuel.
Specifies engine oil capacity, viscosity classes, and topping-up quantity.
Provides clutch type and technical specifications.
Details gearbox type and transmission ratios for each gear.
Specifies the type of final drive and rear suspension system.
Details the front suspension type, spring strut, and spring travel.
Specifies brake types, materials, and pad wear limits.
Information on recommended tyre sets, rim sizes, and tyre designations.
Details electrical ratings for on-board sockets and fuse protection.
Specifies frame type, plate location, and VIN location.
Provides various dimensional data of the motorcycle.
Lists unladen weight, permissible gross weight, and maximum payload.
States the top speed specification for the motorcycle.
Information on the BMW after-sales service network and authorized dealerships.
Details available mobility services for new BMW motorcycle owners.
Outlines BMW pre-delivery checks and running-in checks.
Provides space to record completed pre-delivery and running-in checks.
A table to record details of maintenance and repair work performed.
To Next Page