Need help?Do you have a question about the BMW Motorrad R 1200 RT 2007 and is the answer not in the manual?
General| Displacement | 1170 cc |
|---|---|
| Final Drive | Shaft drive |
| Tires Front | 120/70 ZR17 |
| Tires Rear | 180/55 ZR17 |
| Engine Type | Air-cooled, four-stroke, flat twin |
| Power | 110 hp (81 kW) @ 7500 rpm |
| Torque | 120 Nm (88 lb-ft) at 6, 000 rpm |
| Transmission | 6-speed |
| Front Suspension | Telelever |
| Rear Suspension | Paralever |
| Front Brakes | Dual disc |
| Rear Brakes | Single disc |
| ABS | Optional |
| Seat Height | 805 mm |
| Wheelbase | 1, 485 mm |
Provides an initial overview of the motorcycle and its manual.
Explains symbols and abbreviations used in the manual for clarity and safety.
Details optional extras and custom equipment fitted to the motorcycle.
Covers general specifications, standards, and country-specific variations.
Discusses BMW motorcycle quality standards and potential variations.
Identifies components and features on the left side of the motorcycle.
Identifies components and features on the right side of the motorcycle.
Locates key components and features accessible from underneath the seat.
Details controls and switches located on the left handlebar.
Details controls and switches located on the right handlebar.
Explains the layout and function of the motorcycle's instrument cluster and displays.
Identifies the different lights on the front of the motorcycle.
Explains the basic telltale lights and indicators on the instrument panel.
Describes indicators and messages displayed via the on-board computer system.
Details status indicators related to the audio system if equipped.
Explains indicators for the tyre pressure monitoring system.
Describes indicators for active seat heating stages.
Explains the telltale light associated with the cruise control system.
Details general warning lights and their meanings for immediate attention.
Explains warnings generated by the on-board computer for system issues.
Describes warning lights and messages related to the Anti-lock Braking System.
Explains warnings and indicators for the Automatic Stability Control system.
Details warnings related to the Tyre Pressure Monitoring system.
Explains warning signals for the anti-theft alarm system.
Explains how to operate the ignition switch, steering lock, and key functions.
Details the protection against theft provided by the electronic immobiliser system.
Instructions on how to set and adjust the motorcycle's clock.
Explains how to view and reset the odometer and tripmeters.
Covers adjusting the display brightness and selecting readings.
Details how to select and view various readings on the on-board computer.
Explains how to view tyre pressure readings from the RDC system.
Instructions on operating side lights, low-beam, and high-beam headlights.
Details how to activate, cancel, and operate turn indicators and hazard flashers.
Instructions on switching hazard warning flashers on and off.
Explains the function and operation of the emergency off switch.
Details how to operate the heated grips for comfort.
Instructions on operating the heated front and rear seats.
Explains how to activate and deactivate the ASC system for stability.
Details how to adjust the motorcycle's seat height.
Instructions on adjusting the height and position of the windscreen.
Explains how to switch on, set speed, and operate the cruise control system.
Details how to open and close the motorcycle's stowage compartments.
Instructions on adjusting the clutch lever for optimal operation.
Explains how to adjust the handbrake lever and check brake system operation.
Instructions on adjusting the motorcycle's mirrors for optimal visibility.
Details how to set the spring preload for the rear suspension based on load.
Explains how to adjust the damping characteristic of the rear suspension.
Covers adjusting suspension settings (spring preload, damping) electronically via ESA.
Provides information on recommended tyre types and checking tyre pressures.
Details how to adjust the headlight beam for different riding conditions.
Crucial safety advice covering rider's equipment, speed, loading, alcohol, and hazards.
A pre-ride checklist to ensure important functions are checked before riding.
Step-by-step guide on starting the motorcycle's engine and pre-ride checks.
Instructions for the initial 1000 km of riding to ensure proper engine break-in.
Discusses brake operation, stopping distance, wet brakes, and brake care.
Guidance on safely parking the motorcycle using side stands and center stands.
Essential information on fuel types, capacity, reserve, and safe refuelling procedures.
Explains the partially integral ABS system, its operation, and effects.
Details how the ASC system manages engine torque for stability.
Explains the function and temperature compensation of the RDC tyre pressure system.
Recommends using BMW-approved parts and accessories for safety and suitability.
Information on the power socket's ratings, usage, and automatic cut-off.
Guidance on correct loading, payload limits, and securing luggage.
Instructions on opening, closing, removing, and installing motorcycle cases.
Details on opening, closing, removing, and installing the top case accessory.
Overview of maintenance procedures and the importance of specialist tools.
Details the contents of the on-board toolkit and how to access it.
Guides on checking engine oil level, capacity, and topping up procedures.
Emphasizes the importance of a functional brake system and proper checks.
Instructions on checking front and rear brake pad thickness and wear indicators.
Explains how to check brake fluid levels for front and rear brakes.
Guidance on checking the clutch operation and lever feel.
Information on measuring tyre tread depth and when to replace tyres.
Visual inspection guidelines for motorcycle rims.
Information on recommended tyre types and obtaining detailed tyre information.
Instructions on using and installing the BMW Motorrad front-wheel stand.
Details on identifying bulb defects and replacing various headlight and indicator bulbs.
Procedures and safety precautions for jump-starting the motorcycle battery.
Maintenance instructions for battery upkeep, charging, and storage to prolong life.
Recommends using BMW-approved cleaning and care products for optimal protection.
Guidelines for washing the motorcycle, including pre-treatment and frequency.
Advice on washing regularly to counteract damage from environmental factors and specific cleaning.
Specific instructions for cleaning plastic parts and sensitive components.
Recommendation for applying BMW car wax or carnauba/synthetic wax.
Steps for preparing the motorcycle for storage, including cleaning and battery care.
Procedures for bringing the motorcycle back into use after storage.
Lists possible engine starting issues and their remedies.
Provides torque specifications for various fasteners on the front and rear wheels.
Details engine design, displacement, bore, stroke, output, and torque.
Specifies recommended fuel grade, usable capacity, and reserve fuel amount.
Information on engine oil capacity, type, topping up, consumption, and grades.
Specifies the type of clutch used on the motorcycle.
Details the gearbox type and transmission ratios for all six gears.
Information on the type of final drive and rear suspension.
Describes the front and rear suspension types and spring travel.
Specifies front and rear brake types, pad materials, and brake system details.
Lists recommended tyre combinations and specifications.
Details electrical rating of the on-board socket and fuse system information.
Information on frame type and VIN location.
Provides overall length, height, and width measurements of the motorcycle.
Lists unladen weight, permissible gross weight, and maximum payload.
Specifies the motorcycle's top speed.
Explains the importance of advanced maintenance and using specialist workshops.
Highlights BMW's commitment to service quality and regular maintenance.
Describes the services available via the BMW Motorrad Service Card.
Information on the global BMW Motorrad service network and dealer locations.
Details pre-delivery checks and running-in checks for the motorcycle.
Forms for recording pre-delivery and running-in check completion.
A table for recording all maintenance, warranty, and repair work performed.
To Next Page