97n
Index Data Technology Repairs Car care Controls Overview
Hardtop
4. Remove both the left and right side
trim panels
5. Remove the tool used for locking the
hardtop, located next to the hardtop
catch on the left side, position the
tool and turn it forward until you hear
an audible click. Do this both on the
left and right side of the hardtop to
release both catches
520de112
6. Remove the two oval cover panels
from the front of the hardtop frame,
using a screwdriver, if necessary
7. Position the tool for locking the
hardtop, and turn it outward until you
hear an audible click. Do this both on
the left and right side of the hardtop
frame to release both catches
8. The hardtop's detent mechanism is
now completely disengaged. With
the aid of an assistant, lift the
hardtop up and over the rear of the
vehicle
Do not set the hardtop down
upright, as damage could result.<
520de111
9. Place the hardtop on the hardtop
cart as described in the enclosed
assembly instructions
To avoid possible damage, take
care not to jam the electrical wires
on the left and right sides.<
Online Edition for Part No. 01 41 0 156 878 - © 06/02 BMW AG
To Next Page
