100
Loading and transporting
Through-loading system
Folding the rear backrest
1. Pull the corresponding lever to
release
2. The backrest moves forward slightly
when released. Reach into the gap
and fold it down.
When folding the backrest back
into its original position always
ensure that the detent engages
securely. A loose backrest might fail to
prevent cargo from entering the pas-
senger compartment during sudden
braking or evasive maneuvers, posing a
potential hazard to occupants.<
Rear center 3-point safety belt*
You can roll up the rear 3-point belt
before folding back the through-loading
system:
> Retracting the 3-point-safety belt:
Loosen the safety belt and insert the
buckle latch into the support mount
provided on the rear window shelf.
Online Edition for Part-No. 01 41 0 158 512 - © 09/04 BMW AG
To Next Page
Loading...
Need help?
General
