BMW 320e - Page 117

▷ BMW Intelligent Personal Assistant, see
page 67.
Safety note
WARNING
Parts of the body can become trapped when
the windows are operated. There is a risk of in‐
jury or material damage. When opening and
closing, make sure that the area of movement
of the windows is kept clear.
Overview
Power window switches
Safety switch
Operating requirements
The windows can be operated under the
following conditions.
▷ Standby state is switched on.
▷ Drive-ready state is switched on.
▷ For a short while after rest state has been es‐
tablished.
The vehicle key must be in the vehicle interior.
Opening
▷ Push the switch as far as the resist‐
ance point.
The window opens for as long as the switch
is held.
▷ Push the switch past the resistance
point.
The window is opened automatically. Press‐
ing the switch again stops the movement.
Closing
▷ Pull the switch as far as the resist‐
ance point.
The window closes for as long as the switch
is held.
▷ Pull the switch past the resistance
point.
The window closes automatically if the door
is closed. Pulling the switch again stops the
movement.
Anti-trap mechanism
Principle
The anti-trap mechanism prevents objects or
parts of the body from becoming trapped be‐
tween the door frame and window while a win‐
dow is being closed.
General
If resistance or a blockage is detected while a
window is being closed, the closing operation is
interrupted.
Safety note
WARNING
Accessories on the windows, for example aer‐
ials, can impair the anti-trap mechanism. There
is a risk of injury. Do not attach any accessories
within the area of movement of the windows.
Seite 117
Opening and closing
CONTROLS
117
Online Edition for Part no. 01405A1EA53 - X/20