On the move
Driving
Drive-ready state
Switching on drive-ready state
1. Press the brake.
2. Press the start/stop button.
Drive-ready state is active:
▷ Starting the internal combustion engine.
▷ Drive-ready state for electric driving without
starting the internal combustion engine.
Switching off drive-ready state
1.
With the vehicle at a standstill, engage selec‐
tor lever position P.
2. Press the start/stop button.
The engine is switched off.
3. Apply the parking brake.
Hybrid system driving modes
Overview
Buttons in the vehicle
Button Drive mode
In HYBRID STANDARD and HYBRID
ECO PRO, the vehicle is propelled in
hybrid mode; in other words, in com‐
bined propulsion with the internal
combustion engine and electric mo‐
tor.
In ELECTRIC STANDARD and
ELECTRIC INDIVIDUAL, the vehicle
is driven exclusively electrically.
ELECTRIC INDIVIDUAL can be
specified as the default mode.
With BATTERY CONTROL, the elec‐
tric range can be retained and con‐
served for a later point in the journey
or increased if necessary.
Automatic Start/Stop function
The Automatic Start/Stop function helps you to
save fuel. The system therefore shuts down the
internal combustion engine, if the preconditions
for electric driving are met. The standby state re‐
mains switched on. READY is shown in the in‐
strument cluster. If needed, the internal combus‐
tion engine starts automatically.
Parking brake
Engaging
Pull the switch.
The LED on the switch and the indicator
lamp in the instrument cluster are illuminated.
Releasing
With drive-ready state switched on:
Seite 32
QUICK REFERENCE
On the move
32
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
