WARNING
There is a risk of entrapment when the seats
are moved. There is a risk of injury or material
damage. Before making any adjustment, make
sure that the area of movement of the seat is
clear.
Overview
The memory buttons are on the driver's door.
Saving
1.
Set the desired position.
2.
Press the button. The lettering in the
button is illuminated.
3. Press the desired button 1 or 2 while the let‐
tering is illuminated. A signal sounds.
Recalling
Press the desired button 1 or 2.
The saved position is called up.
The operation is halted when you press a seat
adjustment switch or press one of the memory
buttons again.
Once underway, adjustment of the seat position
on the driver's side is disabled after a short while.
Seat heating
Overview
Front
Seat heating
Rear
Seat heating
Switching on
Press the button once for each temper‐
ature level.
The highest level is selected if the three LEDs
are illuminated.
If a journey is resumed within about 15 minutes
after a temporary stop, seat heating is automati‐
cally switched on at the last temperature setting.
If a driving mode for optimising consumption is
activated, the heater output is reduced if neces‐
sary.
Seite 134
CONTROLS
Seats, mirrors and steering wheel
134
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
