Seat Airbag,
front pas‐
senger
Fastening
1 a) ON
OFF
3
4, 6 - b)
e)
5 - c, d)
a) Adapt the fore/aft position of the front passenger seat and, if necessary, move it to the highest
position to achieve the best possible belt fit.
b) When using child seats on the rear seats, adjust the front/back position of the front seat if neces‐
sary, and also adjust the head restraint of the rear seat or remove it.
c) Only occupy the outer seats if the belt buckles are easily accessible.
d) The seat is not suitable for child seats with a support stand.
e) Depending on the equipment or national-market version.
Symbol Meaning Symbol Meaning
Not suitable for child restraint systems. Suitable for ISOFIX child re‐
straint systems.
Suitable for Universal-category child restraint sys‐
tems approved for use in this weight group.
Suitable for ISOFIX and i-
Size child restraint systems.
Suitable for child restraint systems in the Semi-
Universal category if the vehicle and the seat are
listed in the list of vehicle models from the manu‐
facturer of the child restraint system.
Suitable for child restraint
systems with an upper re‐
taining strap.
Seite 143
Carrying children safely
CONTROLS
143
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
