INDIVIDUAL configuration
General
The individual configuration of the drive mode is
saved for the current driver profile. The configu‐
ration set last is directly activated when the drive
mode is called up again.
Activating the configuration of the
drive mode
Press the button of the desired drive several
times.
Parking brake
Principle
The parking brake is used to prevent the vehicle
from rolling when it is parked.
Safety notes
WARNING
An unsecured vehicle can start moving and roll‐
ing away. There is a risk of accident. Before
leaving the vehicle, secure it to prevent it from
rolling away.
Observe the following to ensure that the vehi‐
cle is secured against rolling away:
▷ Apply the parking brake.
▷ Turn the front wheels towards the kerb on
upward or downward gradients.
▷ Additionally secure the vehicle on upward
or downward gradients, for example with a
chock.
WARNING
Unsupervised children or pets in the vehicle
can set the vehicle in motion and endanger
themselves or other road users, for example by
the following actions:
▷ Pressing the start/stop button.
▷ Releasing the parking brake.
▷ Opening and closing doors or windows.
▷ Engaging selector lever position N.
▷ Operating vehicle equipment.
There is a risk of accident or injury. Do not
leave children or pets unsupervised in the vehi‐
cle. When leaving the vehicle, take the vehicle
key with you and lock the vehicle.
Overview
Parking brake
Engaging
When the vehicle is stationary
Pull the switch.
The LED is illuminated.
The indicator lamp in the instrument
cluster is illuminated red. The parking
brake is engaged.
While the vehicle is in motion
General
Use during the journey serves as an emergency
brake.
Pull and hold the switch. Vehicle brakes
strongly for as long as the switch is pulled.
Seite 158
CONTROLS
Driving
158
Online Edition for Part no. 01405A1EA53 - X/20
To Next Page
Loading...
