BMW 320e - Page 179

BATTERY CONTROL
The display becomes active after
BATTERY CONTROL is activa‐
ted via the BATTERY CONTROL
button.
The available electric range is saved for later.
For further information:
Driving modes in detail, see page 156.
XTRABOOST
The display becomes active after
XTRABOOST is activated via
Driving Experience Control.
For further information:
Driving Experience Control, see page 155.
Display on the control display
Current vehicle status
General
The following are shown:
▷ Active components of the hybrid system.
▷ Direction of energy flows:
Orange: energy flow of the internal combus‐
tion engine.
Blue: energy flow of the hybrid system.
▷ Vehicle states:
▷ ePOWER.
▷ POWER.
▷ eBOOST.
▷ CHARGE.
▷ Coasting.
▷ Charging.
▷ System requirements of the hybrid system,
for example drive system is not yet at operat‐
ing temperature.
▷ Driver request, for example, gear selector
lever in M/S position.
Displaying current vehicle status
1. "CAR"
2. "Driving information"
3. "Energy flow"
Check Control
Principle
The Check Control monitors vehicle functions
and alerts you to any faults in the monitored sys‐
tems.
General
A Check Control message is displayed as a com‐
bination of indicator or warning lamps and text
messages in the instrument cluster and, if appli‐
cable, in the Head-Up Display.
If required, an acoustic signal is also output and a
text message shown on the Control Display.
Hiding Check Control messages
Press the button on the turn indicator lever.
Continuous display
Some Check Control messages are displayed
permanently and remain until the fault has been
repaired. If a number of malfunctions have occur‐
red at the same time, the messages are dis‐
played in succession.
Seite 179
Displays
CONTROLS
179
Online Edition for Part no. 01405A1EA53 - X/20